搜產品
搜企業(yè)
客服電話:13631151688
廣告
Step 1: Software
1. Software authorization: put the software authorization card on the reader and writer, find the authorized place on the software, and click authorize.
2. Change password add operator and give different permissions.
3. Set up the layout of the hotel, add the hotel building area area floor.
4. Add room type, add room number (the room number must correspond to the correct building area area and floor)
Step 2: send setting card
1. Room setting card (one for each room with corresponding room number)
2. Time card (the time card should be swiped and used immediately, and it needs to be remade after 1 hour)
3. Initialization card (some are also called clear card, used to clear the door lock authorization information)
Step 3: set the door lock information
1. Check whether the door lock is installed correctly and whether the battery is installed properly.
2. Set the door lock information, sequence: swipe the door lock authorization card - room setting card (swipe the corresponding room number) time card, if all lights up normally, it means success
3. Test, swipe the corresponding room guest card, can open the door.